Latest site development work Tenders | Government site development work Tenders

CTN :40098548

14 May, 2025 NA

Banaskantha - Gujarat

Tender For tender for supply of ili services for aspl and pvpl - palanpur-ips1 section 18 inch-gauge , cleaning , magnetic cleaning runs running adequate number of gauge , cleaning , magnetic cleaning pigs at the flow rates mentioned in the bid document inclusive of pig tracking of these pigs at 5 to 10 km interval including supply of all such personnel , pigs , tools , tackles , equipment , consumables , spares , accessories , pig tracking device and personnel , transportation required to complete total scope of work by contractor at work site , site report preparation of gauge , cleaning , magnetic cleaning pig runs required for satisfactory completion of works for the section in all respect as per specifications and provision of bid document , palanpur-ips1 section 18 inch-electronic geometry- running adequate number of electronic geometry pig (caliper) at the flow rates mentioned in the bid document inclusive of pig tracking of these pigs at 5 to 10 km interval including supply of all such personnel , pigs , precision bench marking having gps capability at around 10 kms interval , tools , tackles , equipment , consumables spares , accessories , pig tracking device and personnel , transportation required to complete total scope of work by contractor at work site , site report preparation of electronic geometry pig (caliper) runs required for satisfactory completion of works for the section of pipeline in all respect as per specifications and provision of bid document , so as to generate valid , interpretable and physically verifiable data , as optional requirement , if need for egp arises. , palanpur-ips1 section 18 inch-mfl run- carrying out of in line inspection by intelligent pig runs using high resolution mfl technique , along with concurrent xyz mapping so as to generate valid , interpretable and physically verifiable data inclusive of pig tracking of these pigs at 5 to 10 km interval , supply of pigs , tools , tackles , equipment , consumables , spares , accessories , permanent magnet markers , pig tracking device , transportation , personnel , supervision at work site , preliminary site report preparation of intelligent pig runs , data analysis , preparation of major defect report for dig verification , assistance during dig site verification , required for satisfactory completion of works for the section of pipeline in all respect as per specifications and provision of bid document. , final reporting pvpl- submission of final report of palanpur-ips1 section as per specification in 10 hardcopies and 10 softcopies , along with compatible software for data viewing , analysis , interpretation and pipeline integrity analysis software for feature analysis and corrosion growth rate analysis , shall be provided. supplied software shall be as a minimum for 10 pcs (windows 10 os and higher) licenses or 1 network license with three concurrent user at any time as per tender document. final reporting shall also include the training to hpcl engineers as per tender terms. , ips1-vadodara section 18 inch-gauge , cleaning , magnetic cleaning runs running adequate number of gauge , cleaning , magnetic cleaning pigs at the flow rates mentioned in the bid document inclusive of pig tracking of these pigs at 5 to 10 km interval including supply of all such personnel , pigs , tools , tackles , equipments , consumables , spares , accessories , pig tracking device and personnel , transportation required to complete total scope of work by contractor at work site , site report preparation of gauge , cleaning , magnetic cleaning pig runs required for satisfactory completion of works for the section in all respect as per specifications and provision of bid document , ips1-vadodara section 18 inch-electronic geometry- running adequate number of electronic geometry pig (caliper) at the flow rates mentioned in the bid document inclusive of pig tracking of these pigs at 5 to 10 km interval including supply of all such personnel , pigs , precision bench markin

corporations/Associations/Others

CTN :40078927

19 May, 2025 6.56 Lacs

Puruliya - West Bengal

Tender For custom bid for services - reconditioning of coal feeder outlet reducer portion (chute) for both units of rtps-1. transportation of damaged/worn-out feeder outlet reducer portion (chute) from rtps, dvc site to vendor workshop and repaired chute from vendor workshop to rtps, dvc site is in the scope of vendor. 2. loading/unloading of materials are in the scope of vendor except at rtps, dvc site. 3. a joint inspection will be done at rtps site for noting & area marking on chute (area to be repaired) before receiving of material. 4. measure the worn-out portion & cut it completely with the help of cutting tools or plasma cutter. 5. grinding and edge preparation is to be done as per requirement on plate before welding. 6. fit the new plate as per requirement and weld it in chute with proper welding electrode308l and grind finish is required after welding. 7. new plate & its bending in required shape is in the scope of vendor. 8. all consumable like welding electrode, cutting wheel, grinding wheel, etc. are in the scope of vendor. 9. plate material (plate thickness-12 mm, material- ss304, make will be only of three company sail, tata & jindal) is in the scope of vendor. 10. repairing/replacement of ms flange if required will be in vendor scope. 11. payment will be made on actual square meter repaired by vendor. 12. quantity of chute for repair is 12 nos it may vary (may be increase or decrease). 13. delivery period is 180 days after placement of wo. 14. part payment against part supply is acceptable. 15. the reconditioned chute has to be guaranteed for a period of 12 months from the date of supply & 06 months from date of commissioning whichever is earlier against bad workmanship. guarantee/warrantee certificate to be furnished at the time of completion of work. 16. party has to submit the 1:1 fitment cum interchangeability certificate of material. 17. the party has to submit the indemnity bond after placement of work order. 18. pre-dispatch inspection shall be carried out by m/s dvc at vendor s works and the vendor has to intimate 15 days in advance regarding readiness of the material. 19. dimensional verification & positive metal identification (pmi) test shall be carried out during pdi for ss 304 plates welded to chute and the vendor has to arrange machine with valid calibration certificate at their own cost. 20. all the old & damaged scrap cut during the course of work shall be returned to m/s dvc during delivery of chute at rtps.

CTN :39607379

23 Apr, 2025 13.99 Lacs

Mainpuri - Uttar Pradesh

Tender For bid to ras providing of design installation and maintenance of educational lab - smart class lab; supply and installation of hardware, furniture, aluminium partition, site preparation; buyer - providing and fixing aluminium work for doors. windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, ie. at top, bottom and sides with required epdm rubber/neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, c.p. brass/stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing. paneling and dash fasteners to be paid for separately): for fixed portion anodised aluminium (anodised transparent or dyed to required shade according to is: 1868, minimum anodic coating of grade ac 15)

CTN :40025579

06 May, 2025 NA

Mumbai - Maharashtra

Tender For providing of hiring of consultants - milestone/deliverable based - subject matter experts, feasibility studies for nachna site; as per tender; yes; hybrid(as specified in scope of work),hiring of consultants - milestone/deliverable based - subject matter experts, preparation of epc tender and technical evaluation nachna; as per tender; yes; hybrid(as specified in scope of work),hiring of consultants - milestone/deliverable based - subject matter experts, feasibility studies for hrrl township and resorvoir area; as per tender; yes; hybrid(as specified in scope of work),hiring of consultants - milestone/deliverable based - subject matter experts, preparation of epc tender and technical evaluation hrrl township and resorvoir area; as per tender; yes; hybrid(as specified in scope of work),hiring of consultants - milestone/deliverable based - subject matter experts, feasibility studies for hrrl refinery site; as per tender; yes; hybrid(as specified in scope of work),hiring of consultants - milestone/deliverable based - subject

State Government

CTN :40034084

22 Apr, 2025 76.93 Lacs

Shimla - Himachal Pradesh

Tender For construction of ayurvedic dispensary building at dhar tehsil jubbal district shimla h.p. sub head construction of civil work, w.s., s.i. site development works

State Government

CTN :40042143

26 Apr, 2025 14.95 Lacs

Karauli - Rajasthan

Tender For detail survey and consultancy work for preparation of detailed project report (dpr) for construction of karanpur ghati road with safety walls in karanpur ghati on sh-123 km. 65/500 to 68/500 with sbc tests by bore on site, design and drawing

State Government

CTN :39616723

05 May, 2025 88.22 Crore

Delhi - Delhi

Tender For corrigendum : architectural finishing works including dfse and roof sheeting of pre-engineered building (peb) structures and dc of external facade, ws, si, drainage, site development works at four (04) elevated stations of line-10 of delhi mrts phase-iv project.

State Government

CTN :40045479

05 May, 2025 40.66 Lacs

Belgaum - Karnataka

Tender For site development works to nss bhavan building at vtu, jnana sangama, belagavi.(reserved for scheduled tribe category)

Central Government/Public Sector

CTN :40026495

25 Apr, 2025 37.85 Lacs

Narsinghpur - Madhya Pradesh

Tender For custom bid for services - engaging four safety stewards on assignment basis for a period of 24 months at ntpc gadarwara; f work for safety stewards : job description of safety stewards given below is indicative and not exhaustive 1. safety stewards shall be posted in safety control room to monitor the site working conditions through cctv cameras. 2. reporting of safety deviations from safety control room. 3. communication of safety deviations to the concerned in charge. 4. analysis of safety deviations. 5. report preparation. 6. recording the non availability/ functioning of camaras and reporting to the concern. in addition to the above, the safety stewards may deployed in following activities on requirement basis; 7. conducting daily pep talks to the contract employees at site 8. providing safety training to contract employees 9. identifying probable hazards, associated risks and preparation of job safety analysis 10.site inspection prior to issue of ptw and random checking of ptw. 11.carrying out daily site inspections and co-ordination for closure of noncompliances. 12.associating with cisf-fire wing during mock drills 13.associating in safety audits by ntpc and contracting agencies in the respective areas 14.to inform ntpc safety department about any imminent danger observed during inspection at site and taking immediate action like stopping the activity, recommending warning letters ,recommending penalty 15.documentation and report preparation. 16.ensuring statutory compliance and taking appropriate action in consultation with ntpc 17.regular discussions with engineer-in-charges/area engineers/ntpc safety officers regarding unsafe acts/unsafe conditions/unsafe practices observed during inspection 18.normal working hours (general shift/shift duty) will be as decided by engineerin-charge.; safety items: 1. safety shoe (electrical), 2. safety helmet safety jacket.3. safety goggle, 4. cotton hand gloves, 5. cut proof hand gloves, 6. electrical hand gloves, 7. helmet torch, 8. boiler suit, 9. arc suit, 10. nose mask, 11. full body harness, 12. fall arrester.

CTN :40034060

25 Apr, 2025 6.03 Lacs

Mandi - Himachal Pradesh

Tender For construction of public toilet at bari mandi w. no. 9 mandi h.p (sh site development work)

Site Development Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

State Government

State Government

Central Government/Public Sector